SGC101B5S surface mount schottky rectifier reverse voltage 150v forward current 10a www.goodark.com 1/4 2014.06-rev.a features ? schottky barrier diodes ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1 , per j - std - 020 sgc (to 277) moisture sensitivity: level 1 , per j std 020 ? solder dip 260 c, 10 s ? low profile - typical height of 1.1 mm ? heatsink design ? high temperature soldering guaranteed: 26 0 /10 seconds ? halogen-free according to iec 61249-2-21 definition til aliti anode ? 1 anode ? 2 cathode & ? heatsink e sgc (to \ 277) t yp i ca l a pp li ca ti ons for low voltage high frequency inverters, dc/dc converters and polarity protection application. maximum ratings (ta = 25 c unless otherwise noted) parameter symbol SGC101B5S unit vrrm v vrms v vdc v if(av) 1) if(av) 2) ifsm a y maximum repetitive peak reverse voltage 150 maximum rms voltage 105 maximum dc blocking voltage 150 maximum average forward rectified current 5.0 a 10.0 peak forward surge current 8.3 ms single half sine-wave superimposed on rated load 175 tj, tstg c i f =1a operating junction and storage temperature range -55 to +150 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit 0.60 0.65 i f 1a i f =2a i f =5a i f =10a i f =1a i f =2a i f =5a i f =10a volts 0.67 0.75 0.75 0.80 0.81 0.85 t a =125 0.47 0.52 0.54 0.60 0.61 0.65 0.68 t a =25 v f 0 . 60 0 . 65 0.75 m i dc t t t d dc t 25 r ja 1) r jl 2) note1)mounted on fr-4 p.c.b with 30*30mm copper pad area 2)on aluminum substrate pcb with recommended copper pad area maximum dc reverse current at rated dc blocking voltage rated vr t a =25 i r - 0.1 ma t a =125 -20 typical junction capacitance 4.0 v, 1 mhz 240 typical thermal resistance juntion to ambient 35 /w juntion to lead 10 www.goodark.com 1/4 2014.06-rev.a
SGC101B5S surface mount schottky rectifier reverse voltage 150v forward current 10a www.goodark.com 2/4 2014.06-rev.a ratings and characteristics curves ( ta = 25 unless otherwise noted ) figure ? 1.forward ? current ? derating ? curve figure ? 2.maximum non \ repetitive ? peak ? forward ? surge ? current figure ? 4. ? typical ? instantaneous ? forward ? characteristics ? figure ? 3. ? typical ? reverse ? characteristics ? figure ? 5. ? typical ? junction ? capacitance www.goodark.com 2/4 2014.06-rev.a
SGC101B5S surface mount schottky rectifier reverse voltage 150v forward current 10a www.goodark.com 3/4 2014.06-rev.a package outline dimensions min max min max he 6.4 6.6 0.252 0.260 dim unit: mm unit: inch he 6.4 6.6 0.252 0.260 e 5.6 5.8 0.220 0.228 d 4.1 4.3 0.161 0.169 b1 1.7 1.9 0.067 0.075 b2 0.8 1 0.031 0.039 a 1.05 1.2 0.041 0.047 c 0.3 0.4 0.012 0.016 l 0.85 1.1 0.033 0.043 l1 42 44 0 165 0 173 l1 4 . 2 4 . 4 0 . 165 0 . 173 l2 l3 1.1 1.4 0.043 0.055 d1 3 3.3 0.118 0.130 e1 3.52 typ. 0.139 typ. 1.86 typ. 0.073 typ. soldering ?? footprint packing information packing quantities: 5000 pcs/reel 12mm tape, 13" reel tape & reel specification tape & reel specification www.goodark.com 3/4 2014.06-rev.a
SGC101B5S surface mount schottky rectifier reverse voltage 150v forward current 10a www.goodark.com 4/4 2014.06-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good- ark product best suited to the customer ? s application; they do not convey any license under any intellectual p ro p ert y ri g hts, o r an y othe r ri g hts, belon g in g to suzhou good-ar k electronics co., ltd.o r a pp y g, y g, gg , third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party?s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, includin g produc t data, dia g rams, charts, pro g rams and , g p , g, , pg algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information y, g py published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information , py y g, y g contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. p www.goodark.com 4/4 2014.06-rev.a
|
